Access Control , Telephone Entry, Entry Access, entry system, telephone entry systems, entry systems, telephone entry system

LIAM-PR PROXIMITY READER PRICE: $178.00

• Works with both proximity tags and proximity cards.
• Compatible with all Wiegand formats up to 40 bits.
• Weather resistant and vandal resistant.
• 4 to 6 inch read range.
• Supports up to 65,000 cards.
• Easy to install.

• Integral LED confirms when user access is granted

GENERAL SPECIFICATIONS:

• Power: 9-14 Vdc, 90 mA maximum

• Reading Distance: molded card , up to 6 inches (152.4 mm); proximity tag, up to 5 inches (127 mm)

• Proximity Tag Operation: passive

• Transmit Frequency : 125 kHz

• Output: Wiegand, Data 1 and Data 0

• Output Sink Current: 100mA

• Output Source Current: 5 mA

• LED Type : bicolor (red or green)

• Ambient Temperature: (AM-PR and AM-PT) -40° to +70° C (-40° tp +158° F)

• Humidity: 0 to 95%, non-condensing

• Certifications: Complies with UL 294 standards; CE (European standard), and with Part 15 of the Class B FCC rules Dimensions: 3.5

For use with AM-PR proximity reader.

LIAM-PC PROXIMITY CARD 50 Pack
Proximity reader with up to 6" read range. Requires AM-CRI for adding proximity sensing to any access control system, Linear offers the AM-PR Proximity Reader. This close-range radio-based reader works with either proximity tags (Model AM-PT) or proximity cards (Model AM-PC), both of which are slotted to attach to key rings. Upon reading a user’s tag or card, it transmits the entry data via a Wiegand output in virtually any format up to 40 bits. An integral LED confirms to the user that access is granted.

Features:
For use with AM-PR proximity reader.

LIAM-PT PROXIMITY TAG - CALL FOR PRICING

• For equipping a Linear access control system with one or two Wiegand devices.
• Card Reader Interface can be used with up to two 26 or 31-Bit Wiegand input devices.
• Power is supplied by system controller or external source for locally powered readers.
  

General Specifications:

• Power: Supplied by an AM/II or Telephone Entry controller or external power for locally powered readers; jumper selectable
• Capacity: Up to two 26 or 31-bit Wiegand devices; two internal rotary switches select device address
• Wiring: Reader to AM-CRI: six wires for 5o LED readers, five wires for one LED reader Recommended Wiring Type: Up to 300 feet, BELDEN 9931 or equivalent (24 AWG): up to 500 feet, WEICO 9405 or equivalent (20 AWG)
• AM-Cards: Wiegand swipe cards for use with AM-SR card reader, available in sets of 25 cards each
  

Access Control , Telephone Entry, Entry Access, entry system, telephone entry systems, entry systems, telephone entry system, KeriSystems