ACT-21B
Linear
Moore-O-Matic MegaCode Gate or Garage Door Opener
Keychain Remote
is a single-channel device. It is supplied with a
quick-disconnect key ring with two rings – one for
the transmitter and a car key and the other for home
or office keys. Also included are lithium batteries
with a five-year service life. A unique 10-second
time-out feature prevents the system from being shut
down by a single transmitter transmitting
continuously.
ACT-22AB 2 Channel Keychain Block
Coded Transmitter
The ACT-22AB is a two-channel device.
It is supplied with a quick-disconnect key ring with
two rings – one for the transmitter and a car key
and the other for home or office keys. Also included
are lithium batteries with a five-year service life. A
unique 10-second time-out feature prevents the system
from being shut down by a single transmitter
transmitting continuously. This model is MegaCode
format, which means that transmitter is factory
preprogrammed with one of over 1,000,000 codes,
virtually eliminating the possibility of code
duplication
ACT-31B
Linear
Moore-O-Matic MegaCode Gate or Garage Door Opener
Keychain Remote
The ACT-31B transmitter is small enough
to be carried on a key ring in a pocket or purse. The
ACT-31B is a single-channel model used where only one
remote control function is needed, such as an entrance
gate that utilizes a free exit loop.
MDT-2 Linear Megacode Garage Door Opener
Transmitter
- Linear Megacode system, gate or garage door opener
replacement remote transmitter
- Three channel transmitter with two buttons on the
front and one on top (each button performs a different function)
- Visor clip and batteries included
- 318 Mhz frequency, NO dip switches, uses smart coding
system
- Compatible with ALL Linear Megacode System products
MDT-4AB
Linear 5 Channel Block Coded Transmitter
The MDT-4AB five-channel model is for remote
control of up to five separate access points or for combining keyless
entry and panic functions. It is also for use as a “magic wand”
transmitter by personnel responsible for maintenance of a Linear access
control system. It allows the user to lock gate A or B open or closed
(remotely from a vehicle or office), then to perform a reset or “warn
boot” on the system. All three models are MegaCode format, which means
each transmitter is factory preprogrammed with one of over 1,000,000
codes, virtually eliminating the possibility of code duplication. Because
the receiver “learns” each of specific code, no unauthorized person
can gain access to the system by reprogramming a transmitter
|
ACT-34B
4 Channel Key Chain Block
Coded Transmitter
is a cost effective means of incorporating the
security and convenience of block coded transmitters
into nearly any access control application. This model
is sequentially precoded at the factory with unique ID
codes, as well as facility codes. This coding
combination represents the same level of security as a
traditional Wiegand card. The ACT-34B transmitter is
small enough to be carried on a key ring in a pocket
or purse. The ACT-34B is a four-channel model that
sends a unique signal from each of its four buttons.
It is ideal for applications that require access
control for both entry and exit, as well as when
multiple remote control functions are needed, such as
gate and multiple garage access
GT-30
Linear Genie Compatible
Gate or Garage Door Opener Remote
Genie PRO (Intellicode) and Overhead
Door (CodeDodger) garage door openers. System
programming and maintenance can be performed via PC
with Windows based software. The ideal access control
solution for gated communities. A single transmitter
gives the user both gate and garage door access.
- Three buttons and three channels
to operator three independent gate, garage, and/or
other access operations
- Anti-code-theft, rolling code
technology
- Randomly selected from over 4
billion codes with each button press
- 3.75 x 2.5 x .875 inches
GT-31
Linear Genie-Compatible
3-Channel Keychain Garage Door and Gate Opener Remote
Linear Genie-Compatible 3-Channel
Keychain Garage Door and Gate Opener Remote model
GT-31 GT-31
MDT-1AB
Linear MegaCode Gate or Garage Door Opener
Remote
- Compatible with all Linear access receivers and
controllers.
- Superior transmission range.
- Factory programmed MegaCode format supports over
1,000,000 codes.
- Block coding with provisions for facility codes.
- Lithium battery powered.
- Same as product number ACP00721.
|
