PXL-500 Tiger
Controller II
 Powerful,
high-quality, sophisticated access control systems at prices that are much
less than others? How did Keri do it?
Lets start with the world class hardware:
A RISC-based multiprocessor platform, resulting in the new PXL-500 Tiger
II Controller, its companion SB-593 Expansion Board, and high performance,
low cost proximity readers.
The PXL-500 Tiger Controller has all of the functionality needed to
manage a single door, alarm output, and 2 reader ports. A second door can
be added when used with SB-593 Satellite Expansion Board.
The SB-593 Satellite Expansion Board economically provides second
door control plus extra general purpose inputs and outputs.
The PXL-500 Tiger II Controller Platform
The new PXL-500 Tiger II Controller platform has taken Keri's acclaimed
proximity-based access control system to the next level. Strong enough to
manage a 256 door network at a single site or 256 doors per site at
multiple sites, yet tame enough to handle a single door, the PXL-500
continues Keri's tradition of flexibility and expandability.
UL/CSA CERTIFICATION: The PXL-500 is
UL certified under UL-508 (Control Equipment)
New Features
- Locking Metal Enclosure that can also
house KPS-4 Power Supply and battery
- Added RAM for increased cardholder
capacity (up to 65K per controller)
- Alarm
integration capability with GE Interlogix/Caddx NX-8E Alarm Panel
- On-board LAN socket for new low cost
LAN-500
- Increased EEPROM memory to support
future enhanced firmware capabilities
Installer Features and Enhancements
- Double row header pins to ensure SB-593
is properly seated on PXL
- Additional LED indicator to confirm SB
is properly seated
- RS-232 connector changed from DB-9 to
quick disconnect terminal block
- RS-485 continuity indicator LED
- RS-485 connector different size so as
not to interconnect with power input
- LCD Display moved up so as not to hang
below the PC Board
 Reliability
Enhancements
- More protection for RS-485 circuitry
- Added relay protection for arc
suppression
Other Great Installation Features -
Inherited from the PXL-250
- On-board diagnostic tests built into the
controller firmware
- Diagnostic LEDs on the controller board
to assist with troubleshooting communication and controller power
issues
- Automatically senses communication
method (direct connect to PC or via modem)
- Auto-Configures RS-485 grounding for
optimum performance - NO JUMPER SETTINGS
- Quick disconnect terminals
- Software auto-configures system
components, no data entry required
- Push-button setting and visual LED
display of address selection - NO DIP SWITCHES
|
Data
Sheet